TRANSFORMERS

TRANSFORMERS

The Indusul transformers of control, force and power have standard features for general use. Their designs are optimized, with low losses and high performance.

- Dry-type insulation, suitable for sheltered installation;

- In the standard powers from 3.0 to 500kVA;

- For one or more primary and secondary voltages;

- Optimized projects with low losses and excellent heat dissipation;

- Main application in the voltage adaptation of the components to the power circuits;

- Connections of easy access;

- Supplied with different degrees of protection and a varnish coating, providing robust protection against humidity, dust and corrosion, as well as protecting against unwanted noise.

Technical information:

Manufacturing and testing standard: NBR 5356 / IEC 60076-11

Isolation voltage class: 1.1 kV - Voltage applied to test: 3.0 kVrms

Temperature class: F (155° C)

Temperature rise: 100° C

Room temperature: maximum of 40° C, minimum of 5° C; 24h average, maximum of 30° C

Overvoltage limit: Maximum of 5% (with rated current)


Altitude: maximum of 1000m

Force and power transformers are designed for general purpose applications, where voltage supply at appropriate levels is required for supplying machines, equipments and general industrial facilities with maximum efficiency and safety.


35VA to 1500VA - SMC

The control transformers are designed for general use, applied in the adaptation of voltages in the control circuits. They offer galvanic isolation between primary and secondary, in addition to the possibility of different voltages in relation to the power circuits. They have wide range and available input and output voltages, according to the facilities requirements.


2kVA to 15kVA - SMP

Low voltage transformers are applied in the adaptation of voltages in the control, power and force circuits. They offer galvanic isolation between primary and secondary, in addition to the possibility of different voltages in relation to the supply circuits. They have wide range and available input and output voltages, according to the facilities requirements.


20kVA to 100kVA - SMF

Low voltage transformers are applied in the adaptation of voltages in the control, power and force circuits. They offer galvanic isolation between primary and secondary, in addition to the possibility of different voltages in relation to the supply circuits. They have wide range and available input and output voltages, according to the the facilities requirements.


0.1kVA to 0.75kVA - STC

The three-phase control transformers, designed for general use, are produced according to rigorous design and process standards, and its main application is the power supply at voltage levels suitable for machines, equipments and general industrial facilities, with maximum efficiency and safety.


1kVA to 15kVA - STP

The three-phase power transformers, designed for general use, are produced according to rigorous design and process standards, and its main application is the power supply at voltage levels suitable for machines, equipments and general industrial facilities, with maximum efficiency and safety.


20kVA to 500kVA - STF

The three-phase power transformers, designed for general use, are produced according to rigorous design and process standards, and its main application is the power supply at voltage levels suitable for machines, equipments and general industrial facilities, with maximum efficiency and safety.


by Natela - Soluções Web